Manual Shutter Position Calibration needed for Motorpower Relais usage on dual Shuttermotors per window

pitpilot

Hi Shelly developers, since I have many double windows with dual Shutter motors, Relais for each Shuttermotor are already in use.

Problem description:

The automatic positon calibration is failing because the Shutter motorpower cannot be detected when using Shuttermotor Relais.

The only solution:

A Shelly 2.5 Firmware extension for manual position Calibration is needed.

Please give me a feedback if you will provide a Firmware update.

I could support you on System specifaction level.

You can also answer in German !

Regards

Peter

MIHO

Du kannst dein Anliegen direkt mit einen Feature Request per Ticket an den Hersteller geben:

https://support.shelly.cloud/en/support/tic…roposal_archive

Bedenken das Shelly 2.5 aber eine alte Generation ist. Hierfür würde ich keine neue Entwicklung mehr erwarten. Wenn dann eher für die Nachfolger Gen2 und Gen3/4.