Unable to know when garage is open or closed

Hi all,

I searched for all the threads here on the same subject.

My assumption is that I need to attach something else to the shelly to let it know when the garage is closed or not? Please confirm if the case.

However I am hoping this can be fixed from the software side.

Below the settings how its setup now.

The gate itself opens and works perfectly. Unfortunately its showing as 'open' below while its closed.

Inverting will not help as the timer will automatically put the state back to where it was.

If this cannot be fixed with software would be great if you can send me a link what I need to change in the hardware.

Thank you

Hi horkatz thanks for your reply! I honestly don't know as it was done by an electrician.

Attached the pictures of the installation.

There are 2x Shelly 1 Plus; 1x for the small gate and 1x for the big gate.

Screenshots above are for the big gate.

Let me know if you need any more information? I can ask the electrician to come back and make changes if required.

Thank you!

Thank you thgoebel - any suggestions on how to proceed next?