Serial interface destroyed

Liviu

Hi, somehow I destroyed the serial interface and now I'm trying to flash with FTDI adapter, I soldered the pins but the RX is not accessible anymore.
Can I solder the RX on another place on bord?

https://tinypic.host/i/shelly-1l-5.xxDFY

thgoebel

Welcome to the forum,

To your issue: RX is directly connected to the ESP8266. You’ll have to dismantle the relay sub-board to gain access to the appropriate pin:

Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.

Soldering is quite a pain with this fine pitch…

Didn’t try it yet. Good luck!

Liviu

Thank you, was to difficult to reflash and I ordered another one.