I can't complete the installation

    So you should upgrade your Firmware in Webui to the neweset Version.

    After that you have to open this URL in your Browser

    Code
    http://<shellyip>/longifyid

    Your Device will change Device ID From 6 to 12 signs. And do Factory reset. After that you should be able to connect with app

    This worked for me:

    Beitrag

    RE: How to update the firmware of a Shelly Door Window 2 ?

    It seems that when sensor has access to home network and user can access embedded web interface via access point, then firmware update works without any need for "proxy" etc.

    Therefore I succeeded by following the procedure:

    1.Start with factory reset = unplug batteries, plug batteries back and press and hold smaller hole for 10 seconds (se User and Safety Guide and Press and hold the button for 10 seconds for Factory Settings Reset. Successful factory reset turns on the LED indicator to flash…
    petrf
    26. Februar 2024 um 19:41