Shelly 2.5 inline with existing Nice TT1N Roller shutter control unit

VPN/Proxy erkannt

Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.

    • Autor

    Greetings,

    I'm planning to retrofit Shelly 2.5 into my existing roller shutter setup that's currently controlled by Nice Mindy TT1N.

    What I'm looking to achieve is to retrofit Shelly 2.5 inline with Nice TT1N wireless controller, allowing me to control the shutters with both the exiting Nice Ergo 6 remote and (new) Home Assistant automation.

    I would like to ensure that the wiring diagram for my planned installation shown below doesn't contain any major flaws and it's safe for the existing installation

    Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.

    The reason to keep the existing Nice TT1N wireless module is to allow the kids and guests to control the stutters (since they won't have an easy way to obtain access to HomeAssistant).

    Any help and feedback will be much appreciated.

    Einmal editiert, zuletzt von Dodger_ (22. August 2022 um 01:17)

  • Dodger_ 22. August 2022 um 01:01

    Hat den Titel des Themas von „Shelly 2.5 inline with existing Nice TT1N“ zu „Shelly 2.5 inline with existing Nice TT1N Roller shutter control unit“ geändert.

    Welcome to the forum!

    And you did a good job: Nice diagram, solved issue (theoretically)! Now it needs a proof in real life. Give it a try and check it! Don’t see any obstacles…

    „Habt Geduld. Alle Dinge sind schwierig, bevor sie einfach werden!“ (aus Frankreich)

    „Nothing in life is to be feared, it is only to be understood.“ (Marie Curie, 1867-1934)

    „Comment is free, but facts are sacred“ (C.P. Scott, britischer Verleger)