Direct valve position control (e.g. for bleeding, etc.)

alexvs

According to the API documentation (link), one can get the position of the valve (/thermostats/0, "pos" attribute).

How can one directly SET the position of the valve (e.g. fully open or fully close)?

Such a feature is needed for situations when particular valve positions (at least fully open and fully closed) are required regardless of the target and measured temperatures, for example:

- when bleeding the radiators (the valve must be fully open)

- if a pipe/radiator has to be replaced/repaired, or any other related activity (the valve must be fully closed)

- when performing complete valve open-close cycles, in order to prevent it from becoming stuck/calcified/etc.

realbudhead

Vote up

ploppythekangaroo

Agree.

Although you could just set the valve to 0% or 100%

realbudhead

I wasn't aware of this functionality when I wrote my post, but it defently works fine. Already tested.

When you disable automatic temperature control, the valve can be set in any position.

alexvs

Zitat von ploppythekangaroo

Agree.
Although you could just set the valve to 0% or 100%

In those (and I can imagine most...) of the cases, yes, one could do just that.