Beiträge von tronico

I ask the question. I would like to know how the opening of the valve is modulated. because at the beginning it starts with

low opening values? Thanks for the reply

Well, I had set up the project with 6 trv commanded by 4 shelly1 and other devices through http strings. So I have to make it the valves that manage the shelly1. But how come when the valve is activated it starts at low opening values (5%, 10%) and does not immediately open to 100%?

Is it not possible to have the valve only 0% or 100% ?

there is no wakeonlan command ?

so shelly1 is not good at sending http commands to TRV ?

ok , but i can't ping from shelly 1 or control4 ip driver. shelly1 syntax seems correct to me.

?

Ciao.

i have shelly trv which sometimes doesn't execute http command

example :

http://10.0.0.70/termostato/0?pos=100

http://10.0.0.70/termostato/0?pos=0

he doesn't seem to wake up

Thanks