Hi.
People it's possible to have same device on different rooms as Sonoff?
I have a room called Lights (with all lights) But also want tha devices on proper rooms such kitchen etc.
What i must to do remove an device and put on other room?
Regrds
Beiträge von L.Sousa
-
-
Hi
Anyone knows what's the minimum distance between the 2 pieces to the sensor works fine? i want to put that sensor on garage door but there's some gap between the rollher door and the structure.
Regards
-
okay, in this case you can it use so.
And the right button type is momentary.
With auto off timer too
The problem here it's the type of buttons it's fuzzy there's good explanations here on German but not on English or also on Portuguese there's the reason i'm offering to make the Portuguese translation too
-
okay, in this case you can it use so.
And the right button type is momentary.
With auto off timer too
I don't have any right button! Only a big button. When i press the current flows, i leve the and over the button and he returns to the initial position and current doesn't flows. It's a mommentany switch.
-
1. Your shelly witch is controlling the garage door has a pir installed? That's working good? I was thinking that this is a bad idea?
2. Use an action instead off a scene
When output on url
CodeHttp://ipFromOther/relay/0?turn=on&timer=3002 seconds and really works!
-
-
1. Your shelly witch is controlling the garage door has a pir installed? That's working good? I was thinking that this is a bad idea?
2. Use an action instead off a scene
When output on url
CodeHttp://ipFromOther/relay/0?turn=on&timer=300No o have no PIR
Why it's an bad idea?
-
Did I set the buttons correctly? Could it be due to the relay just working 1 second?
-
Here's the screenshot
-
Hi i need you help again. I have installed an Shelly 1 on my garage door. Work's fine, i have defined the button type as: Activation Switch - use it for motion sensor. Any input turns "ON" and resets Auto OFF timer. with a 1 second off autotime off. I whant to create a scene that when i open the garage door the shelly 1 i have with my exterior lights power on about 5 minutes and after that time powers off. How can i create that scene. I have already tried but doesn't works.
Regards
-
-
Hi.
I'm a Portuguese guy that translate various app on the market (Evernote, Musixmatch, MX Player, Spritmonitor.de, Fuelio, etc).
I'm offering my job to make the translation to European Portuguese. I already have accounts on Onesky, Pootle, Crowdin, Localize, Trasnsifex, etc. If you want please contact-me.
Leandro de Sousa
-
Hi.
There's any chance to have the news about firmware updates?
Regards
Leandro de Sousa
-
Hi
There's any formula to calculate the value to put on the Obstacle Detection ? I have an Roller Shutter with a 180W consumption. What shoud the value to protect my shutter? 190W? 200W?, etc.
Thank's
-
Hi
That's correct. Now it works!!!!
Hi again,
i read just in time a in german thread:
Please try the Type "Momentary" again. This should work.
-
I have solved the problem. just to activate the option: Make this sensor default for the room.
-
You can open a ticket to the producer Allterco.
Perhaps, he do so.
Done!
-
There's many people here on Portugal using this kind of light switch. It will be nice a new feature on firmware.
-
Set Button-Type on "Toggle"
With second pressing of same button, the roller will stop.
That way to give and button order i must to press down stop and again down because the stop position opens the circuit and the down position leaves the circuit always closed. So to close a litle bit the shutter i must to press Down --> Stop --> Down (to stop again), or if i want to open a bit Up --> Stop ----> Up (to stop again). On the original button with no Shelby only press Up --> Stop
Please see the video at 3.00 you can see the light switch working
-
Set Button-Type on "Toggle"
With second pressing of same button, the roller will stop.
But that kind of buttons on my house aren't a push buttons. On Stop mode the current can't pass and pressing on the arrow the button remains fixed and the current flows. If i want to close the shutter i only have to press the down arrow and go away, the shutter goes to the % closed. If i press on the Up arrow the mecanical mechanism put's the down arrow button to stop position and open the shutter and i can go away because the button it's fixed on open mode. I can always press stop and the shutter stops.
