Beiträge von L.Sousa

Zitat von MIHO

....

Also on English please.

Thank's in advance

Zitat von 66er

I hope, you answer this to Allterco too?

In did so. But as i can see they simply don't care i'm just a guy on millions of devices...

My friends here's whats Shelly support have decided to my "impossible reset consumption data" on one of my Shelly 1 PM:

Zitat

Ticket Status: Open

Dear Sir/Madam,

The only option is to change the account to which the Shelly is connected. We ensure you that it will work.

Thank you for your time!

It's normal that? Tell me to create a new account?

This is normal? I have more than 50 devices and I must create a new account and configure everything again just because one of my Shelly does not delete the data when I do a hard reset? Is it normal what support gave me as a solution? Shouldn't the device be like the Shelly EM that you can even reset via the app.

Zitat von MIHO

best to pocket out the clamps against original Wago. The supplied ones are not good.

Hi. You are correct! I discovered the connectors are to wide to the small wires.

I just don't know why they are selled with that connectors.

Regards

Hi

I have bought a temperature addon. I have connected the temperature sensor and installed on one of my already working Shelly 1, but the sensor doesn't appears on the settings. I have already tried some reboots but no sensor.

I need to do a reset to that device?

Thank's in advance.

Thanks

Hi

People, it's possible to connect a humidity sensor to the temperature sensor on a Shelly 1?

Regards

I have already done that but no awnser until now!

Hi

Hi have changed one of my Shelly 1 PM to another room, i have made a hard reset.

But something strange happened

- The consumption values remains the same from previous room

- A scene still turning on that Shelly scene (used on previous room). I have also tried to delete that scene but the scene stills running...

How can i fix that?

Regards

Hi

I have changed the place to my Shelly 1 PM. So i want my device becomes with all comsumption data at zero.

There's any change to do that?

Regards

OK. Just a new question when the physical switch it's pressed on a 2.5 Shelly how the relay changes to on? The coil needs a DC current to close the coil? The processs it's equal to wi-fi command and sw command?[bugtracker][/bugtracker]

So it means the phisical switch it's with energy?

Hi

Can anyone explain me what's that? As i can see sometimes apears a blue bar on button but i can't understaind nothing about that.

That option isn't available to me!!! It will be nice to share devices with oother accounts only the settings i want. Only use open or only close or both with no settings change etc.

Zitat von ChSp

Dear Michael,

same answer as more than one year ago. It is a bit bothering to set up all my Shelly actors (n=7) every time again (rooms, pictures, settings ...) when members of my family want to control them as I do with their own devices (tablet, smart phone). Being able to copy the settings from one or all actors in one account to another account or from one device to another would be very helpful. Can this be solved by using one 'un-personalized account' used on different devices by different users?

Thanks for any hints!

Christof

Yes it's true

Can be available an administrator and users that can only access to the devices the administrator wants...

Zitat von petrtvaroha

MIHO Could you please let me know how to wire it to Shelly flood? Shelly Flood has 3 pins ...

I think you must to conect the 2 wires on exernal sensor to the exterior pin near the Shelly logo inside device and one od he top ones. you can connect and try until find the right ones

Zitat von SebMai

only if you imitate a momentary switch.

And set the button type to momentary too

Oh ok. So if i have a normal on/off switch i can't activate a scene without a specific condition. It will be nice something like 5 time reset. Anything such 2 rapid on/off to activate a scene...

Hi.

On the Shelly 2.5 on the Scene setting i have the options Button pushes: 1. When Shelly relay button is short pressed and When Shelly relay button is long pressed.

How can i do a short or long press on an banal on/off switch?

Regards

Ultil now only a few number of my 40 devices have updated....

Zitat von MIHO

The Flood reacts very poorly to no rainwater. Therefore it is rather not suitable from my point of view.

But you can use the contacts for example with something like this:

https://www.ebay.de/itm/Regensenso…872.m2749.l2649

connect them, then it should work very well

Thank's. It's an idea!