it is inside the housing close to the reset button. It should flash rapidly after pressing the reset for 10 sec. If there is no led lit thdn you could have same issue as me.
Beiträge von Fesi
-
-
I had similar problems last week with my 3 year old shelly 2.5. First I had no network connection only the connected light switch was working. So I had to restart it by switching the Fuse off and on. It worked for several days again. Then the problems came back even worse. I realized the red led was flickering uncontrolled. Root cause was a faulty elco 100myF /16V. After replacing the shelly is running again.
-
123RoHei . Willst Du die Shellys über die Shelly Cloud betreiben? Dann kannst Du wie oben beschrieben den i4 nutzen und die Schalt Aktion in der Cloud dann verknüpfen.
Eine Beschaltung des SW2 wie von dir eingezeichnet funktioniert nicht da im 1Button Modus wie oben bereits beschrieben der SW2 nicht in Funktion ist.