Beiträge von MajaM

Ok, clear...

I was referring to the other issue with touch button not hawing memory in the sense that it would not remember it's state (ON/OFF). So if Shelly would cut off the turned on switch, then when Shelly would turn it back on , the switch would be turned off (as ON state would not be remembered by it).

But there should be no issues with this with the current wiring (in the above image).

I still don't understand what you've meant when saying :"Voltage of power supply should be higher than 24V DC. ".

I thought that exactly 24V DC should suffice as this is the common rated voltage also for led strips...

WRT:

(a) Don't have it yet but I presume it will be 24V as that is required voltage of led strip that I plan to have.

(b) Is this about led strip with adjustable brightness? I plan to have ordinary led without dimming (brightness changing) feature. Or did I understand you wrongly?

Hi Thgoebel,

Thanks for update.

I've tried to came up with this (based on the information that you've provided). Is that wiring correct?

Dear Shelly users,

We would like to wire Shelly Plus 1 to turn ON/OFF a Led strip combined with touch switch.

The wiring for switch looks like:

Now the problem there is that switch doesn't have memory - so if Shelly will be wired before 12-24DC transformator, the ligth will actully won't be turned on when Shelly will provide AC power to transofrmator.

I would be really happy if someone could provide me with the wiring that would work fine in this particular case.

Thank you in advance.