Thanks,
you have put me on the right way.The documentation is really confusing, but finally, with copy-past and a lot of testing I found the right topic and payload.
Topic: zwembad/rpc ==> Where zwembad is the configured device name, don't forget the /rpc
Payload: {"id":1, "src":"PFC100", "method": "Switch.Set", "params":{"id":0,"on":true} } ==> Where the first ID and SRC is something you choose, this comes back in the confirmation message.This can be closed
Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.
Hello,
i am trying for some hours to do the same - switching the relay from MQTT, but it does not work.
in my opinion i am using the same "order" as Nick - but the relay does not switch...
is there anything else to configure on the ShellyPlus1PM?
mosquitto_pub -t 'shellyTest/rpc' -m '{"id":124, "src":"shellyTest","method":"Switch.Set", "params":{"id":0,"on":true}}'with the http commands it works fine - both possibilites known to me work:
http://192.168.2.xxx/relay/0?turn=on
http://192.168.2.xxx/rpc/Switch.Set?id=0&on=truegetting status infos like power and energy via mqtt works also fine only relay switching does not...
thynk you for your help,
Karl