I'm in a similar situaSide note: there is currently a bug in the TRV firmware (I use v2.1.8): even then you program a decimal temperature value, e.g. 19.5, it only takes the integer part (in this case 19).
The problem has already been reported on Sep 29th 2022 . here
When will the problem be fixed?
I have a weekly schedule set from TRV. Every day at 07:00 the temperature should be set to 22.5 Celsius. However, when I look in the morning the temperature is always set to 22 Celsius. During the day it can be manually set to 22.5, but if the weekly schedule sets the temperature to a decimal place the TRV does not respect that.
OMG. I fixed the format. Looks like it's working now.
Thank you.
The methods for waking up the device are known to me. However, the warning message displayed is confusing when it states that you just need to refresh the web page to wake up ( reconnect).
Yes. plushtprod1.2
I wake the device Shelly plus H&T with the button, enter the local web GUI. Once the device goes to sleep in 3 minutes , the page disconnects and shows a warning message ( refresh the wake page manually.... ) . However, refreshing the page in Edge , Chrome does not wake the device. You need to press the button to wake up the device.
I've already tried that. I tried it now, but it didn't help. I also tried the H&T device button to wake up, that didn't help either.
The instructions are clear, but it doesn't work. Although the temperature of HT has changed many times, TRV has not experienced this change.
Both devices are on the same network.
Hi,
I can't connect the Shelly TRV with new Shelly H&T plus, so that the HT gives me the temperature for the TRV ( temperature offset ). Probably using a webhook, but I don't know the exact format. Can you help me.
