Beiträge von theli

I've install current limiter but it didn't help...same reboot of shelly.

Unfortunately nothing changed...what else i can do?

Device log:

3798749936 cloud_aes.c:569         free mem: 38152 / 22392, bytes to send: 48
13798848388 cloud_common.c:1171     Cmd: status
13798853277 cloud_common.c:149      Confirmed status serial 58
13798857940 cloud_common.c:1174     Cloud clear status timer
13798866535 cloud_aes.c:569         free mem: 38000 / 22392, bytes to send: 32
13799184427 mgos_http_server.c:180  0x3fff2654 HTTP connection from 192.168.1.24:53411
13799201042 json.c:426              RAM: 50864 total, 36956 free
13801093558 shelly_sntp.c:433       minute tick at 16:07:00
13801236194 mgos_http_server.c:180  0x3fff2654 HTTP connection from 192.168.1.24:53434
13801252808 json.c:426              RAM: 50864 total, 36956 free
13802271677 mgos_http_server.c:180  0x3fff270c HTTP connection from 192.168.1.39:35964
13802283456 switch1.c:394           Relay on pin 4 changed state 0 to 1
13802290254 cannot emulate flash mem instr at pc = 0x40202840

sorry...today I was able to reboot device with 3 bulbs...the big one reboot (sometimes it happens) that device is not responding, switching button is not working, device is unavailable from cloud & others integrations (mqtt/HA). In this situation only global fuse switching helps...

@thgoebel extra info...I took out 1 of 4 bulbs and it is working well...waiting for current limiter

Where you put eq3? Between shelly and leds or before shelly?

Updates:

1. new shelly1 out of the box...the same behaviour...1 to max 5 switching on or off cause reboot (when switching off is a new for me - this one I see now when switching directly from shelly app).

2. bulbs are 8w...this is interesting because in next room, with 3 same bulbs & same scenario this issue never happen so maybe 4 cross the threshold...

now i am waiting for current limiter for final check.

3. in other room where I do have 6 of this bulbs in 1 lamp all its working ok but there is a dimmer2

Thank you all for help! amazing!

Thank you,

I've ordered this one.

I'll check after work...about 7W each...that ntc thermistor should be installed between shelly and lamp right? any special other parameters are important?

Hi,

Thanks for info...the lamp is 230v without transformer. Bulbs are led for sure. Today i will check with other shelly (new one). So if it is not low voltage do this inrush current limiter helps?

a lamp...regular one...

1 light switch but wires shared with front door house light (prev msg photo ...but...look..i have extracted all from the wall & it is separated in air...FYI) I just made a test to check how others shelly 1s react when i instant turn on/off for 20 times and it is ok...for this one after 3rd change it reboots (via shelly cloud)

so what you recommend to do right now?

how & how u know it?

ok...it is reboot...device is unavailable in local network...restart is really quick but very often.

It looks that induction is not a problem. I took everything out from wall and separated wires. I've check vie shelly cloud app turning on/off...after few ones device reboot (or something...uptime starts counting from beginning but device is available in cloud in 7sec and it is very quick imo)...

well...I took shelly from wall socket to separate wires from device...maybe there is to much of them and some induction happens?

Hi!,

No, I'd never seen reboot after switching off...

Switch is practically never used because shelly motion is a trigger for turning on/off (via HA + NR)...sometimes somebody who does not leave at house use switch for turning off and it is working correctly. To be honest same configuration shelly1+motion I have in 6 places and only this one has an issue.

Switching on from HA interface manually via interface has same results ~ 1/3 actions causes reboot.

In HA I use official shelly integration.

Hello,

I've still reboot problem in 2 out of 20 my shelly 1s. FW is latest everywhere. WiFi coverage is very good.

It happens 1/3 times right after switch on command from HA.

The log contains:

2712973427 json.c:426 RAM: 50864 total, 36400 free
2725536115 json.c:426 RAM: 50864 total, 36580 free
2727546757 mgos_http_server.c:180 0x3fff222c HTTP connection from 192.168.1.39:36838
2727555596 switch1.c:394 Relay on pin 4 changed state 0 to 1
2727562357 cannot emulate flash mem instr at pc = 0x401a5ac0

any suggestions?

br,

arek