VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
I see. I have read in this forum about people that used multiple bypasses on the same lamp made it work for them, that is why I mentioned it.
By the way, I see that is tricky to know when a lamp is going to work without neutral and Shelly 1L. Thank you very much anyway!
I tried with a Shelly Bypass, same result. In the end, I found a way to use a Neutral wire and now it is working as expected (without the snubber nor bypass), with no blinking when turning it off.
Do you think if I would have used more bypasses it should have worked?
By the way, thank you for your help!
Thank you for the welcome. My lamp is 21W, you can see its specifications here. I didn't mention it, but without Shelly installed, the lamp works fine.
I decided to automatize my LED lamp in the living room with Shelly. My setup is a two-way switch, so I used the very well-known diagram for that setup without a Neutral connection as the switch where I have Live doesn't have Neutral wires. Everything works as expected except that when I turn off the light (physical switch or from the app) the lamp is blinking. I contacted the technical service and they suggested using a Shelly RC Snubber, which is very similar to the Shelly Bypass and is connected in the same way. Unfortunately, the result is the same. I already have read in the forum other people with the same issue but no solution provided, so I guess I am unlucky here.
In case nobody can provide a solution, is there a way to know which LED lamps won't blink when turned off? I am willing to change my lamp (which is very new) but I cannot be buying multiple lamps just to test which ones work.
Thank you!
