Beiträge von acfnews-poe

  • Shelly Motion 2 nor reacting anymore

    Hi all,
    I have a same device, which stopped detecting motion after year(s) of operation. I believe I had no issue with the latest firmware 2.2.4.

    Closer inspection reveals within a 1 - 2 meter range there is motion detected, not not at longer range. Changing the sensitivity setting does make a little difference, but it is not as sensitive as it was in the past (value 40, courage whole floor).


    Is there a way to inspect/measure the components inside?


    Al other operations seem to work OK (tamper, battery, luminance, wifi....)

  • LED Leuchtmittel Kompatibilitätsliste

    Hi

    The following LED bulb does work, but it flickers at the low dim range, maybe this can be added to the list?

    Connected to a Dimmer2, trailing edge, Null-wire connected.

    - Philips

    - Master (Ledluster clear)

    - 20 years / 20000 hrs

    - Sparkling Warm Light

    - 250 Lm

    - 2700K

    - 4W E27 220/240v P45 CL 50-60hz 35mA

    - ordercode 192565xx

  • Flickering with 4 Philips LEDs

    Hi All,

    I have a Dimmer2 connected to a ceiling light with 4 Philips 4W 2700K 35mA (9290002147) , I guess the bulbs are connected in parallel with each other.

    Firmware is  20221027-104444/v1.12.1-ga9117d3

    Switching on/off works perfect.

    Dimming 20 > 100% works perfect.

    Dimming 0 < 20 works bad, the led's start to flicker/flash, while the light is still too bright.

    I'm migrating from older Xanura A10 to newer Shelly devices, in the past dimming went flawless with A10 dimmer.


    Example of LED bulb:

    https://www.ebay.it/itm/2751573216…ABk9SR663m86GYQ

    I noticed other people have also flickering issues, how can I try to resolve/debug this?

    I tried playing with calibration and anti-flicker-debounce but with no satisfying result.