VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
Thanks. Now all functions work correctly.
I did not understand at all that outgoing "control voltage" needed to be "+" on both sides, I assume that UNI OUT +, becomes GND in my test
(I also did not understand that GND would be connected together everywhere)
A tips for you. Mountplate for the shelly products, Look att link.
I get no function anyway. (I tried a fectory reset.)
No matter how I measure, there is nothing that makes a lamp of 0.5w can shine over 3 and 4.
Out -> 100ma over 12v = 1.2v lamp (should shine)
I can not get function for any out relay function, if I do not get voltage out
What am I doing wrong?
bg
Per
If I do as you say, I measure incoming GND and outgoing GND, It's zero.
Only incoming + and outgoing + are directconnected. otherwise I always get power on outgoingI followed this thread because I have the same problem. I connect the Vcc 12v(red) cable directly to the Out1(+).
But don't get a measurable VCC out. UNI GND to Out1(-) is missing.
In the App and Cloud UI i can turn outputs on/off, and both have "relay on". The UNI white cable is connected so I see that ADC gives 11.91v.
What's missing?
/Parlan