I would not expect to have any problems with 16A through the Shelly L and N connections. It's clear from the diagrams that Shelly designed the two N connections to carry the 16A load current. A Wago is nice where it is difficult to use a screwdriver but I don't think it is needed to divert 16A or less from the Shelly connections.
Beiträge von jay kinnard
VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
-
-
You don't need a connection to the SW terminal. You can invert the switch function in the Channel Settings if you want it to turn on when power is applied.
-
I bought two PM1 Plus at the same time and both are marked the same. Both are running 0.9.1 firmware. One shows power and voltage but the other only shows power. The Channel Settings are also different with one having a Maximum Current setting and the other lacking that setting. Did I get different levels of hardware or is there a device setting that is causing the difference?