VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
-
It's a simple 1 plus.
The light I'm using has a control board. You normally don't interact with it, but I managed to expose some pins and added some optocouplers. I can now control the brightness of the light with 2 outputs of a microcontroller.
The Shelly can be connected to mains, has a switch input, a relay for the light itself and has io 0 and 19 available on the outside. So hardware seems perfect for this application.
I was planning to write my own software. But if I can do it out of the box + script, it will make my life much easier. I would only need an mqtt topic connected to each io pin.
-
Hi, I was wondering if it is possible to control GPIO 0 and 19 (on the small connector) through a script. That would be very handy to control the brightness of one of my lights.
-
Great work. Thanks a lot for the quick fix!
-
This a bug in Firmware 0.9.0! An update will come soon…
Thanks for clearing that out.
Was scratching my head for more than an hour... 😁
Is there a list of known bugs?
-
Hi all
I just got my Shelly Plus 1. Upgraded to FW 0.9.0.
Now I'm trying to detach the switch input from the relay switch, but can't find how to do it.
There are no options for setting this up in the web UI.
If I try using RPC with:
{
"jsonrpc": "2.0",
"id": 1,
"src": "user_1",
"method": "Switch.SetConfig",
"params": {
"id": 0,
"in_mode": "detached",
}
}
I get the following reply:
{
"id": 1,
"src": "shellyplus1",
"dst": "user_1",
"error": {
"code": -103,
"message": "Missing or bad argument 'config'!"
}
}
What am I doing wrong?
