Beiträge von patrickl96

Update: Solved by a user on reddit. Anyone else wanting info can read here: https://www.reddit.com/r/homeautomati…2way_wiring_nz/

Hi all, I'd like to find out if I've wired my Shelly1 correctly for a 2-way switch, or what needs to be done to correct it. To be honest I don't fully understand 2-way switches so I'm sure I've done something wrong.

I live in New Zealand and a neutral wire is present in the light switch box and it's running on 240V AC.

I've attached photos on how the two physical switches are wired into the Shelly 1 currently (bottom switch in each photo, the top one is for different lights)

If I use physical switch 1 & Shelly app (set to edge mode), this works fine without any troubles and I'm able to toggle the lights being on/off.

My issues arises when I turn on power via the shelly app, then physical switch 2 won't do anything (the lights flicker once but the lights remain powered on).

I'm wanting to be able to toggle the lights being on/off using either the Shelly app, physical switch 1, or physical switch 2.

For reference, this is the datasheet info for the switches: http://documents.portalink.net/product/190603…20HPML0595B.pdf