VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
Hi,
We have in our company 3 silos that store glue and the users have to go close to them to check the percentage occupied.
Is it possible to put a Shelly 1 PM (or other) and get the value of the display? known that 0 is 0% and 20mA is 100%.
Thanks!
Sorry for my newbieness but I'm not following. Is it possible do make a layout of what you are proposing.
Thank you!
@66er Thank you!
picture changed.
The problem is that the relay work as a phone call, on off, on off... not continuous and the siren doesn't have the "power" needed to work.
Hi,
I have a phone system that has a relay and the goal is to set the bell to ring during the day and the siren at the night.
I tried initially with two Shelly 1, one connected to siren and the other to the bell, both where configured with sunset and sunrise on and off, later I removed 1 shelly and connected the siren and the bell to the Shelly 1.
The bell works ok, it rings as the same way as the telephone, but the siren doesn't because it receives intermittent power.
There is no problem if the siren works for 60 seconds despite of answer the call ( eg. applying a timer).
Is there a better solution for this purpose? I am using the wrong device? how to work with the relay and the Shelly
Thank you
