Beiträge von tankstage

Hello, can the neutral connection to the PRO 4PM be different to the neutral on the loads ?

I will be powering the PRO 4PM from a 6A RCBO that will be on a different 16A RCBO to the loads...

Also, the PRO 4PM will be on a battery backed supply, so the neutrals may not be connected to the same potential if the grid fails..

Thanks

Please ignore, just noticed the live is also the supply to the loads...

Quick question about the Plus 2 PM...
Can the two inputs be configured to control one output?
This would leave the second output unconnected, or can the outputs be linked together without problem?

The situation two switched outputs from single port heating valves to then call for demand from a boiler. Currently they are just paralleled into one feed out. I would like to monitor which valve is actuated.
This could be achieved with relays, but the shelly units are so much neater...

Thanks

duncan.gardiner  @66er : Thanks for the reply's.

I already have the add on module , but I was after a way of having a LAN connected device as the location of the required control is in my greenhouse and the WiFi drops out to my Sonoff THElite that controls my greenhouse heater (via Home Assistant).

It looks like I will have to go the ESPhome route with an Olimex ESP32 POE....

Is there any way to add an external temperature sensor to the Pro 1PM ?

Hello, I have just downloaded the app from the first post, but when trying to install I get errors from the installer, such as "The NI Uninstaller 19.5.0 installation has failed. Continue?". If I press continue I just get lots of other errors mostly with the "NI" text in, until the installer exits. Any idea why?

Thanks