Beiträge von Helge Kooistra

I saw that it is now possible to flash the firmware to make HomeKit integration possible.

But I wonder: if I do that, can I still use the official app, or does it only function in HomeKit?

And is this new firmware supervised by Shelly itself or completely an open source project?

Thank you, I will try tomorrow!

Zitat

welcome Helge Kooistra

see also here: connection diagrams Shelly 1PM

Thank you but to me it seems that ‘my situation’ is not shown. They all seem to use a switch, only the one with the washing machine is different, maybe I have to use that?

Main power: Blue, Brown an ground

Ground: connect directly to the light

Blue: split in two wires, one into N port on Shelly and the other to the light

Brown: into Shelly L ( what’s the difference with L1?)

Brown(or black): from Shelly 0 to light

Is that correct?

I saw another example where

they told to leave the SW and L empty when not using a switch. In my example the device on the left side is the lamp

I want to install the Shelly1 pm witch out an external switch, just directly between the power outlet and a light.

I found instructions about this connection for the Shelly 1 (not the pm but the blue one).

Can I use the same wiring for the Shelly 1 PM? The ports are in a different order but the labels are the same