Beiträge von LMSSML

Hello

Bradly new to shelly EM I was getting previous a shelly 1PM which was working perfectly to get access to read the energy produced.

I get 2.8 Kw for example when I get a good weather, the only thing that I get its when I get above of 3.5Kw I get shelly disconnected and need to connect again.

Posted here on this forum (Overconsumption device switch off) and I get advised to get a Bradly new Shelly EM.

Which I did after some research I get the information that -3.2W was meaning that was the correct value since was it should be read that its not consumed but was produced by the solar panel side.

Although I get some questions

I get 3.7 W why not getting 3.7 Kw like shelly 1 PM shows, is there any reason or maybe a not well know for the configuration on my side ?

Another situation that I get it its at night after shelly 1 Pm gets values for 0 (which was not producing anything ) I get always the last value

for example -1.98 W (which I think it should be -1.98 Kw ) I need to power off and power on again in order to get 0 on the value, is this normal behavior ?

After some searching and some videos and since I get only for the solar panel it seems normal getting -3.66w which means that we are producing this kind of current like the image show bellow.

And it could be read that the returned field its the one that was produced

since I do not have connected to the main board on the house I'm not consuming anything .

After I get my shelly EM i get connected but the strange behaviour its that I get -3.62W is this the expected behaviour ?

THe same way its connected with shelly 1 PM I connected shelly Em

L

O

N

Thanks for the information

I will try one of those.

I willpost the result here or int he correct part for shelly EM

After the upgrade it works fine but still gets the same situation

everytime they pass 3500 w I get shelly to be poweroff

Is it possible to change this number ?

Hello

I'm new on the shelly side and after configure on my mobile phone it was working very well
and I was very happy

Although the shelly 1 PM was bought specifically to monitor the solar panel production .

I made the upgrade of the firmware for version 1.11.2 and suddenly I get Overconsumption and shelly power off .

I went through the options and I tried to untick the power off function for 3500W.

Thinking that I get solved the problem I get after sometime the same problem.

Overconsumption although no thick its present and I get all this situation .

I research for the issue and I see that some people has downgraded the firmware but I tried and success to do the same .

But problem persist at this moment I get version 1.10.4 and same problem.

Is there anyway of not getting power off , another shelly , another option that I might failed ?

Image in attach