Beiträge von Karibou54

Hi 66er,

Setup in HA?

I use the schelly integration, automation is a follows

For closing

alias: Shutters closing without alara - Salon
description: Fermeture des Volets Sans l'alarme - salon
trigger:
  - platform: sun
    event: sunset
    offset: '00:30:02'
condition: []
action:
  - service: cover.close_cover
    target:
      entity_id: cover.volet_salon
  - service: notify.whatsapp
    data:
      message: Fermeture des volets sans alarme - Salon
mode: parallel
max: 10

for Opening

alias: Ouverture des volets sans l'alarme - Salon
description: Ouverture des volets sans l'alarme - Salon
trigger:
  - platform: sun
    event: sunrise
    offset: '00:45:00'
condition:
  - condition: device
    device_id: 77eb1e188369bdd2984d1038756d43f1
    domain: cover
    entity_id: cover.volet_salon
    type: is_closed
action:
  - service: cover.open_cover
    target:
      entity_id: cover.volet_salon
  - service: notify.whatsapp
    data:
      message: Ouverture des volets sans alarme - Salont
mode: parallel
max: 10

Setup Shelly?

Power On Default Mode : ON

Open / close working Time : 24 / 21, after positionning controls

Input Buttons Mode : open & close - Use Seperate buttons for open & close

Button Type : Toggle

Mode : Rollers Schutter

Firmware versions?

20210720-184731/v1.11.0-g6abd92

Thanks

Regards

Hello,

I have a problem with my shelly 2.5 in shutter roller mode.

I carried out the calibration of the shutter, the shutter control is done by push buttons, an impulse on the PB for the descent, an impulse the other PB for the ascent.

The shelly 2.5 is also associated with home assistant for automation.

My concern being, mainly when closing the shutter only, I don't have the problem when opening.

When I press the PB for closing or when it is time for the HA automation to close. I hear a pulse on the shutter, but it does not close .... And I have to press the closing BP several times.

Do you have any idea 💡?

Thank you