Beiträge von Filipe Meira Castro

Zitat von weida277

Hi

I updated yesterday all my devices to v1.12.

1PM now produce uncontrolled ghost light switching on/off, mostly on during night.

As they worked properly before FW upgrade I suppose the new FW is the reason.

Any idea how to fix this?

Has anybody similar problems ?

Alles anzeigen

I have the same, but I narrow it down to circuits which also have i3. They are off for one week and is ok since. Now I'll downgrade the i3 and test, then upgrade i3 and test again!

It would be a nice update. I also tumbled upon the same issue.

As a workaround I do the scene and only after that I move the device to hidden, and it works fine. the only issue is if you want to change the scene you need to temporary move out from hidden for changing scene settings...

N/A

I tried the link

https://xxx/device/relay/c…XX&auth_key=XXX

but gives response...

{"isok":false,"errors":{"wrong_channel":"Could not control this relay channel!"}}

with similar setting on cURL it works, but not with this direct link,

What might be the issue?

Zitat

Which device type is the 1st gen or 2nd gen (NG devices)?

It happens on 1st gen 1PM and Plug S and on 2nd gen 1PM+, seems it's related with iOS app rather than the device.

This item is shown as fixed but it is not fixed!

Still happening everytime under iOS using latest app and cloud v1.1.39

Time-off not refreshing - values decrease but not from the actual time. To update with correct time need to go into the device and out.

easily reproducible on iOS, found on v1.0.30 and still happening on 1.0.58 at least:

1) set a timer off of 30 minutes (optional step if the device already had this timer!!)

2) just turn on a device

3) open a different application

4) when you go back (after for example 10 minutes), the time is still decreasing as if the timer has just started (from the 30 minutes) and is just refreshed if you go into the device and back

(video attached)

I also had to pair with the reset button pressed!

Done the firmware update afterwards, hopefully is fixed!

worked great, thanks