Beiträge von pitpilot

I also opened a ticket to the support to add a manual position calibration. The easiest solution would be to use open/close working time settings

Hi Shelly developers, since I have many double windows with dual Shutter motors, Relais for each Shuttermotor are already in use.

Problem description:

The automatic positon calibration is failing because the Shutter motorpower cannot be detected when using Shuttermotor Relais.

The only solution:

A Shelly 2.5 Firmware extension for manual position Calibration is needed.

Please give me a feedback if you will provide a Firmware update.

I could support you on System specifaction level.

You can also answer in German !

Regards

Peter