Beiträge von martinarva

Was able to change it to light. As the option consumption types is not available in the UI for Plus 2 PM, i used curl to write the values:

curl -s -X POST -d '{"id":1,"method":"Sys.SetConfig","params":{"config":{"ui_data":{"consumption_types":["lights","lights"]}}}}' http://192.168.1.41/rpc

Update is still not possible to do. Could update another Plus PM2 to 1.0.8, but not the one having issue.

I have several Shelly's around house. I have issue with one gen2 Plus 2PM.

First of all i have set it up to use with home assitant and have choosen Lights as a Appliance Type. However entity in Home Assitant is still switch.

Hi!

I just installed Shelly 2.5 to my roller shutter. To be excact it's not a roller but pergola roof blinds like this:

There is a Somfy motor. I don't know which model, because it's hidden in the frame. It came with a remote to control it.

Wiring from the motor has 4 wires:
Grey - Phase
Blue - Neutral
Black - Direction 1
Brown - Direction 2

I wired Shelly 2.5 outputs to Direction 1 and 2 and left the Grey (phase) connected around Shelly so that my remote workes.

Probably due that 4 wire design I cannot do the calibration, because power to the motor is taking power from the phase wire and there is no power consumtion the direction wires.

I still want to have position control, so my question is how can I achieve this?

Is it possible to measure opening and closing time and just calculate position from there? Movement is linear and same on open and close.

Other option is to somehow measure the phase wire power but i dont have an idea how to feed this information to shelly2.5.

Somehow my Somfy Nina remote knows the position and it works pretty well. Here is manual, but did not find any calibration stuff from there. https://service.somfy.com/downloads/be_v…lnina_io_v3.pdf

So it was network error after all.

Somehow my DHCP server (pihole) gave the shelly address, which is was a broadcast address. Changed IP manually and voila, eveything works. Feeling kind of stupid, but definitely smarter than before

Zitat von Seven of Nine

I'd assume there's some kind of networking issue (firewall, missing gateway, different wifi network where client communication is disallowed) But this is just a guess..

I have thought about that also, but i have no internal firewall in use, everything is in the same wifi network. I have Ubiquiti network infrastructure. Mosquitto is reachable. As I migrated Shelly Plug just few hours earlier with the same configuration in the same enviroment, It's unlikely that something in the nework changed. Also device web ui is accessible.

I'll troubleshoot once again in the evening.

Zitat von Seven of Nine

Regarding Coap/ CoIoT: Have you tried to configure the Dimmer using Unicast instead of Multicast?

Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.

Also: there's absolutely no need for both MQTT and CoIoT. I'd recommend to use either CoIoT OR MQTT, not both at the same time.

Note: after changing those settings the Shelly need a Reboot.

Yes, I used excact Home Assistant address and port. I tried only MQTT and only ColoT and both together. What's interesting is that other shelly's including Dimmer 2-s are working with the excact same configutation.

Why aren't there any information about ColoT in debug log? I can only see that device cannot connect to Mosquitto (MQTT0 TCP connect error (-8)). As there are no log entries from Mosquito side, I suspect that outgoing connections don't work. Except the web UI, which seems to work.

I'm supecting some defect on the device. I'll have few more dimmers waiting for to be installed and I try another unit. Probably would try some older firmware before that just to be sure.

EDIT: Just to add, i tried factory reset as well.

As said in original post, I have the latest.

“Current version: 20211109-131033/v1.11.7-g682a0db 

You have latest version on your device!”

Also every other shelly is working.

Hi! I Have around 20 shelly devices in my network including 8 Dimmer 2-s.

Today I added one more Dimmer 2 to living room lights.

Added wifi, device has now IP and I can access the web UI. Did firmware update to latest, calibration, and added the MQTT server and CoIoT as usual, but Home Assitant did not notify that new device has been found as usual.

Neither is the device in my MQTT network.

Turned on the debug log. There is no information about ColoT, but for MQTT there is a error:

[script] [/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script][/script][script]

1297981689 mgos_mqtt_conn.c:472    MQTT0 connecting to 192.168.1.35:1883
1304278091 mgos_mqtt_conn.c:230    MQTT0 TCP connect error (-8)
1304285737 mgos_mqtt_conn.c:257    MQTT0 Disconnect
1304352481 mgos_mqtt_conn.c:551    MQTT0 connecting after 64178 ms

[script][script][script][script][script][script][script][script][script][script][script][script][script][script][/script]

There is no log entries in Mosquitto for this particular Dimmer2.

I have tried to reboot device, Mosquitto (MQTT) and Home assistant. Everything else is working. Other dimmer2-s with the same firmware are working. Mosquitto is working etc..

I can ping the dimmer2 and web UI is working, so don't seem to be nework isssue. I'm out of ideas. Maybe a faulty device?

[/script][/script][/script][/script][/script][/script][/script][/script][/script][/script][/script][/script][/script][/script]