Beiträge von solderchicken

Zitat von intripoon

you can always turn the light to 100% immediately by double clicking the button. I have not found this in an documentation. I just discovered this at some point by accident. But I really like this. So now I can switch the light on to the last brightness by normally pressing the button and if I want it full brigth I just do a quick double press instead.

Great find!!! I would like the main switch to always turn the light on 100% but do not want to leave the dimmer in detatched mode or any failing in the IP = no working lights = divorce.

The double tap is a great find though, thank you!

Update

I was able to flash the mgos via USB->UART connection and tried many differnt firmware to try and restore stock FW. I was able to load mgos - then tasmota - then Shelly FW from the archive and the device booted ok!

However, when I updated via Shelly web interface OTA, I was reverted back to the Mongoose Web Server Index page.

I tried many many times but could not update to latest.

I have now managed to flash the firmware in the link below via USB and it works perfectly. And I was also able to update to latest 1.10 FW via Shelly interface.

https://github.com/Mollayo/Shelly…tock%20firmware

Edit: I downloaded SHDM-2.zip from https://api.shelly.cloud/files/firmware

Not from the archive here...

------------------------

I had a Dimmer 2 running ESPhome that I would like to return to Stock FW.

I installed

https://dl.dasker.eu/firmware/mgos512k-0x7000.bin

from ESPhome webserver

Joined the mgxxx wifi and ran

curl -i -F filedata=@C:\Firmware\SHDM-2.zip http://10.42.42.44/update

The dimmer2 now boots and displays a wifi to connect to but I cannot integrate into the Shelly app (fails)

If I connect to the wifi shellyxxxx webpage I still see a Mongoose style "Index of /" web page but with more links than when just had the initial mgos installed (See screenshot)

Have I gone wrong somewhere? Any help much appreciated! Thank you