Beiträge von Shubham

Appreciate your reply.. Solved and working well . Also the cost shows up with a good degree of accuracy. The following link also helped to get more info :

Shelly 3EM 3-phases Energy sensor - Configuration - Home Assistant Community (home-assistant.io)

Home Assistant has recently introduced Energy Monitor.

Energy Management in Home Assistant - Home Assistant (home-assistant.io)

Which are the correct sensors to be used in the Configuration / Energy / Electricity Grid? The data is required in KwH . Please assist.

Greetings... I have the Shelly 3EM and would like to cut off the power in any phase where the voltage exceeds 260 V or goes below 200 V . Is this possible ?

...ditto... connection problems after last firmware update

Greetings... Since the last few days the graph / data options of 24h , Weekly , Monthly ...etc has blanked out ...Did a soft reboot , which did not work and also a reset .Again blanks (greyed out) . I have the latest firmware v1.10.4-g3f94cd7 .

All other functions are in order.

Thanks for your advice.

Greetings ,,,attaching two debug fils for your review.

Appreciate the way forward.

Greetings...

I also have the Shelly 1PM which powers my Washing M/c . I use automations in Home Assistant (I have all my Shelly Devices integrated into Home Assistant, a breeze!!) . When a cycle is complete it sends messages ( as you would like to configure) to "Telegram" and/or a mobile device and Announces through the "Alexa" speakers .. Perfect. The link is below. One can adapt the automation for other suitable devices.

https://community.home-assistant.io/t/notify-or-do…finishes/254841

Have a great day.

The Shelly 3 EM since installation about 3 months ago frequently loses the Wi-Fi connection and reconnects after a few minutes. The Signal strength is "excellent" with -55dBm . I have several Shelly 1 's and Shelly 1PM where there is no disconnect to the WiFi . I have the latest firmware update :

Current version: 20210413-154243/v1.10.2-gb89901a

What is going wrong ?

When active , all the figures are accurate . I use the Shelly Cloud App, the Web UI and the Shelly integration to Home Assistant .I have reset the 3EM several times , but the same problem persists.

I look forward to your assistance.

The Shelly 3 EM since installation about 3 months ago frequently loses the WiFi connection and reconnects after a few minutes. The Signal strength is "excellent" with -55dBm . I have several Shelly 1 's and Shelly 1PM where there is no disconnect to the WiFi . I have the latest firmware update :

Current version: 20210413-154243/v1.10.2-gb89901a

What is going wrong ?

When active , all the figures are accurate . I use the Shelly Cloud App, the Web UI and the Shelly integration to Home Assistant .

I have reset the 3EM several times , but the same problem persists.

I look forward to your assistance.

You have latest version on your device!

I have the Shelly 3EM installed and integrated in Home Assistant through HACS (Shelly for HAAS (Shelly Integration))

I have the Power (Watts) consumptions (current and Total) on all three channels displayed correctly but the Voltage and Power Factor entities / sensors are missing. Your assistance will be welcomed. I do not use MQTT.