Hi J,
Thank you for your confirmation. I hope that there is someone from Shelly looking at these open threads.
One more info, I remembered that I had not tested the group sliders on the web desktop. They work indeed flawlessly on the web version, so this confirms my previous suspicion that this a simple app bug.
BTW, my app version is 3.71.36 running on IOS.
Rgds,
I have several shelly 2.5 controlling rollers at my home, some of them associated in groups (for example, all rollers in the same room). It worked without any problem in the old application (from 2020 to 2023, at least).
I just noticed recently that, in the new app, the group slider control is displayed, but the rollers do not react when the slider percentage is changed. I am able to use the up/down/pause buttons of the group control and all rollers open/close at the same time, so this is not a group setting problem. Moreover, when the rollers in the group are synchronised, the group slider displays the correct position. All individual sliders work without problem. BTW, all shellys are connected through the cloud.
Anyone had a similar issue? The group slider not being able to actuate the rollers seems a simple app bug, since everything else works.
Sorry if I missed some previous thread on this subject, but I was not able to find it.
Thanks in advance
The same here. Three 1L installed, two are Ok. The third one sometimes produces faint light when switched off or makes a nearby bulb to flicker when switched on. Hopefully the problem usually goes away operating the physical switch on/off. It seems to me that this is related to the bypass or the bulb/load type. I did not try yet to replace the bypass, possibly my next step.
