OK, I'll try to downgrade it tomorrow.
Beiträge von EddyVDB
VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
-
-
Hey 66er, thanks for your respons.
The firmware is the latest, 20211026-072015/v2.0.3@1dfb9313
-
Hello, I have a Shelly Motion installed in our hallway which controls a bulb that is connected to a Shelly 1.
No the problem is that the motion detection is very poor, it detects me when I am 1 meter before it.
What can I do to improve this behavier.
I've already tried changing the illumination definitions
Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen. and putting the motion dection at very sensitive
Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen. -
I had the same problem yesterday evening. I'll try to get the status next time I see this issue.
-
Many thanks Seven of Nine, this solved my issue.
-
Hello,
I have a lamp which is controlled by 2 2-way switches and I would like dim/control the lamp also with a Shelly Dimmer 2.
The dimmer 2 is already installed as described in the diagram.
Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen. I can turn on / off the lamp with the switches and also with the Shelly app.
Now the problem is when I turn on or off the lamp with the Shelly app, the first time when I toggle one of the switches, then lamp doesn't goes on or off.
When I toggle the switch second time, the lamp goes on or off.
The only settings I've changed in the Shelly app are Button type to "Toggle switch one button" and calibration to "trailing edge".
What am I doing wrong?