Beiträge von armaster

  • Shelly access point wifi mode

    Hi,

    Is it possible to set one shelly device as AP mode which would be a "master" and then other shelly devices set to client mode which connects to master? In other words, Is it possible to have a dedicated wifi network provided by one of shelly devices which can be used as "local" cloud for all shelly devices and using I/O URL actions between them?

    Is it possible to change default AP name and IP (192.168.33.1)?

    Thanks.

  • 3em ampere log

    Hi, Thanks for hints. Ended up with Home Assistant. After searching on forums for few days and tweaking I ended up with this:

    Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.

    I have separated graph card for each pahase. Each card shows current apere, max apmere and history graph (screenshot from my phone shows only two phases).

  • 3em ampere log

    Hi,

    I'm not familiar with Homematic. It will take to much time to learn it.

    My preferences are:

    1. Raspberry pi

    2. 1 minute data sampling from Shelly 3em (url://IP/status) to get at least voltage and current

    3. Data can be stored into mySql data base or csv file, which should be easy export. No fancy GUI just link to download file or url to mySql query editor

    4. Simple installation and setup with tutorial would be appreciated.

    No cloud requred, only LAN communication.

    Thanks.

  • 3em ampere log

    Hi, I bought Shelly 3em and connect to three phase heater. I would like to know the maximum amps, which heater consumed. Log file does not contain this data.

    1. Is it possible to add average and maximum amp and voltage to the existing log data for each minute?

    2. Is there any other way, to log this data to file or database? Perhaps raspberry pi? Data can be acquired with periodic http://ip/status commands. Does anyone already use that kind solution?

    Thanks