VT's and CT's are both in the correct plugs (A and C) there is nothing connected to LB as I am using it as N
Beiträge von fbliman
VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
-
-
Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.
I exchanged B and C but, the power factor changed, but still getting the same error -
Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen. The Voltages seem correct, and currents as well, but it looks as if it is doing the calculations as if it was an Y conection. Apparent power are very high, and active very low
-
i conected phase B to N and it strarted! great.
Is there any way to program directly to output the power via the app, or I have to do the calculations in my own script?
-
Thanks!
Do you think that conecting phase B to LB and N, at the same time, can create a problem?
-
Hi, I have just got a pro 3em 3ct63 for mesauiring my home supply (one phase gets down quite often) so I want to monitor to avoid getting my motors broken.
The supply here is 3 wire delta 230V phase to phase. I conected the jelly but is does not start. I guess that the power supply is LC-N, and as I do not have N it does not start.
2 questions-
-If I conect LA or LB to N, will it start (it will get 230V LC-N(LA))
-If I get it to start in that configuration, can I later change the setup so that it measures the power in delta configuration, or it only works for Y configuration?
Thanks!