Beiträge von sebi5361

Dear community,

I would like to know if someone has tried permuting Live and Neutral on a Shelly 2.5?

What I mean exactly is:

Suppose you have a Shelly 2.5 + Roller Shutter + Wall Switch wired according to the official document connected to mains using a brown (for live) and a blue (for neutral) wire (+ yellow/green for earth). It works as expected.

Suppose now you connect those 2 wires the other way round (live to blue and neutral to brown).

Will this affect the functioning and/or might damage something?

Thanks for your feedback

I just got the confirmation that RED means ERROR.

But I had an error not because of bad action settings, but because of bad MQTT settings.

Now that my MQTT settings are correct the LED doesn't flash RED anymore.

Zitat

If I'm right, the shelly doesn't wait for an answer.

You are definitely right as even hitting a wrong URL won't turn the RED LED on.

Thanks @66er @Olsche!

Happy to be part of this community.

I didn't try hitting any WLAN URLs, only LAN URLs.

Maybe this is the reason why I get this RED signal.

I will do additional tests...

I have configured some actions on my Shelly Button1.

I was wondering the signification of the colors that show up on the Shelly Button1 transparent ring when pressing on the button. What I have observed is a sequence always ending with RED with what I have configured.

- Does RED means ERROR?

- What URL answer does the Shelly Button1 expects not to return RED?