Hallo,
ich möchte sechs 12V/4W LED Lampen hinter einem Trafo sowie zwei 230V/4W LED Lampen gleichzeitig mit demselben Shelly Dimmer 2 schalten und dimmen.
Funktioniert der Dimmer mit dieser Art gemischter Last?
Beiträge von kiezpro
VPN/Proxy erkannt
Es scheint, dass Sie einen VPN- oder Proxy-Dienst verwenden. Bitte beachten Sie, dass die Nutzung eines solchen Dienstes die Funktionalität dieser Webseite einschränken kann.
-
-
Funnily enough, everything works as expected after upgrading the firmware to last week's firmware version 1.8.5. Although the changelog only mentions a fix regarding a short button press, I assume that it contains some LED dimming fixes as well.
Anyhow, I guess the essence is: if you encounter problems with Dimmer 2 and LED bulbs, try flashing firmware 1.8.5.
-
Will do, thanks! Any hints on what to look for specifically?
-
Hi, thank you for your reply!
I do have dimmable LED bulbs. Firmware is 20200904-094614/v1.8.4, which should be the latest one if I'm not mistaken. So I'm kinda stumped why my setup doesn't work as expected.
-
Hello,
I have 5 LED bulbs with 6.5W each in my lighting fixture. Spec'd minimum wattage for Dimmer 2 is 10W. My bulbs flicker with 25Hz when I switch them on. When I start calibration, the dimmer eventually crashes with the mysterious "Error 4". I've set the Dimmer to "Trailing edge", which should be correct.
Is there some hidden setting I could try to make it work, or do I just have to buy bulbs with a higher wattage?
Thanks in advance for any hints!