Hi Forum.
I have several Shelly motion devices. All of them always show that the status is "dark".
Even if I change the illumination definitions in the sensor settings, the device thinks it is dark.
Does anybody have an idea what illumination definitions I could use to have the correct status displayed for bright, dusk and dark?
Any help is welcome!
Hi forum.
I have created a group of Shelly devices.
My aim is to to switch that group On or Off based on sunset and sunrise.
Can anybody think of a clever way to do this?
Any suggestions to get me on track are welcome
Thanks.
I have found the cause: in the I/O URL Actions menu, the "END OF MOTION DETECTED" URL status was "turn=on".
Changed it to "turn=off" and now all is good.
Thanks @Olsche
We have used quick settings on shelly motion to switch on a Plug-s device for 1 minute.
Plug-s switches on when motion sensor detects movement but it does not switch off after 1 minute. In fact, it never switches off.
Anyone any idea what is going wrong here?
Help much appreciated.
Solution:
1. If the i3 is online, you can connect to it (or any Shelly) via it's ip address.
2. The best way to find the ip address, is to scan with Angry IP Scanner.
Download AND use it free from: https://angryip.org/download/#windows
3. In Angry Ip Scanner, right click the ip address -> Open -> Web Browser
4. The web interface of your Shelly opens. Now you can set your values.
Tip: if I/O URL actions are not working on, for example, your i3, you must check whether the url to be hit is still correct. Use static url settings in order to prevent linking to the wrong url.
Why are you looking on Facebook?
There is more: for example if you want to set a certain brightness, one cane use:
http://192.xxx.xxx.xxx/light/0?turn=on&brightness=70 Since the topic is closed, I cannot add above addition there.
Hi All,
What exactly does it mean when my Shelly plug-s blinks slowly?
Everytime when I reset or restart it, after some time I get the message "DEVICE IS OFFLINE".
I have tried to give it a static IP. It does not help.
See also this printscreen: http://prntscr.com/w9vkbs
Hope somebody can write some clever words.
Thanks in advance.
Dear forum members.
Since yesterday my 2 Shelly i3 are dead. We did not change anything to the network.
It's possible to access the 2 devices, but there is no response at all.
Also, when we try to connect them to a different wifi network, they both give an error message: "Error! Could not manage this device type!". See second pic.
The button in the app is blank like in this image:
When we try to reconnect, this error shows up:
Anybody has an idea what is the cause?
I'd rather not reset the devices because then we have to reinstall all connected url's and scenes.
Thanks a lot in advance.
I have created a scene. For this scene I have not used a spare Shelly as SebMai suggested. Instead, I have used a Shelly Plug-s that switches on at sunset, anyway.
The rest of the scene is as SebMai suggested. Hence:
If:
Shelly Plug-s is on,
and
Shelly dimmer is on,
then:
set Shelly dimmer to intensity xx%.
This implies that if Shelly dimmer is off at sunset, it will stay off.
Exactly what I was looking for.
Thanks SebMai.
Ich habe eine Szene gemacht. Fuer diese Szene habe ich ein Shelly benuetzt die sowieso einschaltet mit Sonnenuntergang.
Morgen kann ich dir sagen ob es geklappt hat.
Danke SebMai; auch für die schnelle Antwort.
Ich werde diese Woche versuchen ob es klappt.
Ich gebe dir Bescheid.
Hello SebMai. Yes, I have spare Shelly's.
I also have a Shelly i3 with free ports.
I wonder what you have in mind.
I have a Shelly Dimmer 2.
Everyday on sunset, it switches on with an intensity of 30%.
Is it possible to ONLY switch it on and dimm to 30% when it was on before?
In other words:
1. If Shelly Dimmer 2 is on, switch it to 30% intensity at sunset.
2.If Shelly Dimmer 2 is off, keep it switched off at sunset.
Anybody has an idea of how I could achieve that?
Thanks.
Why are you looking on Facebook?
Your post is very useful. I hope you will manage to extend that post for all Shelly devices, eventually.
Btw, I managed to control Shelly dimmer-2 with the following syntax:
http://[device ip address]/light/0?turn=toggleOff topic: Could you do something similar for a noob level instruction for setting a fixed ip address for Shelly devices?
Would you know where in the Shelly documentation I can find that kind of info?
... turn=toggle
You are a hero Stefan.
Would you know where in the Shelly documentation I can find that kind of info?
Hi!
I need help with the syntax to control plug-S via Shelly i3..
I have a momentary switch with Shelly i3 connected to it.
The i3 controls a Plug-S.
To switch on the plug-s with the momentary switch with the i3, I use this command:
http://[plug-s ip address]/relay/0?turn=onThis switches Shelly plug-S on when off.
Using the same momentary switch and the i3, what would be the command to switch Plug-S on when off and vice versa?
Thanks.
Hi.
I have 2 rooms with Shelly H&T.
In one room the humidity and the temperature are being displayed in the dashboard.
In the other room the nothing is being displayed.
See image.
Does anybody have a clue how I could get the values being displayed in the second room?