Beiträge von fabian maes

Thanks for your explaination.

So first i absolutely need a shelly 1PM and my 2PM can't be use?

And then i have to use a wago on each wire that comes from the motor. And from this wago i go to the shelly and with another one i go to the button?

You're right i can say YES to the three questions.

The motor is directly connected with a socket on the root.

My push button doesn't use any Live or Neutra wire juste two wires that goes to the motor.

In your diagram 6 you talk about the live wire (red) but i don't use it on the button

i've double checked and i did a mistake.

the motor is plugged into a socket.
And behind my push button i have two cables plugged on L and 1

This two one are not really L because motor is plugged in the socket.
it goes to the motor and i suppose it's the UP and DOWN.

But i tested to plus this two cables on the shelly 2 PM in the 01 / 02 and from the S1 / S2 i go to my push button.
With this method it doesn't work (button or app)

Do you have a way to solution this?

thanks for your help

i'd like open my garage doors.

From now i have a button in the garage.
If you press on it it goes DOWN ==> STOP ==> UP ==> STOP ==> ....

Behind this button i only have two cables (L + another one that goes to the engine)

I ned to keep this button but i'd like a shelly module to open it from my phone.

I hope you have enough detail to help me

Thanks for your reply.
Do you know which one should i use for this case?

Hi,

I bought a shelly 2PM and it works great with a roller shutter.
I found the schema when i have a UP and DOWN cable to the engine but i d'on't find the solution when you have only one cable to the engine (behind my push button)

Someone can help me?

thanks

Hi,

I've bought a module Shelly + 2PM and installed it for my roller shutter.
It works fine to open and close but i'd like to know if it's possible to open it in percent.

I saw the api /cover (Cover | Shelly Technical Documentation)

But i received an error 404 for example with this call: 192.168.0.125/rpc/Cover.GetStatus?id=0

Do you have an example to use it with api?

thanks