Beiträge von Arthurvz

I have the Shelly 2.5 which I'm working with. Would you happen to know what kind of NO/NC relay I can connect to the Shelly? I do have a simple 5v Relais Module at home but I'm not sure if I can use this one.

Thank you for your reply, I'll go brush up my languages.

Do I have to connect the NO/NC relay to the Shelly 2.5 or is there a Shelly which has this combined and should work?

Thank you so much for the reply!

I did search the forum, but I couldn't find any related subject, or did I miss something?

In the attachment is a picture of the other side of the printed board. The lift itself is build into a cabinet, so it's hard to take pictures of. But the type is a DQ TV lift 505 (BTVHZ505). I couldn't find any information about the seperate components though. If it's the only way I can open up the cabinet and try to take some pictures.

Can you do anything with this information? I hope to hear from you and thank you in advance.

Hi everybody,

I could use some help with something I'm stuggeling with.

I've got a TV lift with a wireless remote that sents a signal to a wireless receiver. I want to replace the receiver with Shelly 2.5 so I can control the lift with phone.

I've bought a remote with a cord and connected this instead of the receiver and this worked. Then I've cut the cords and connected the wires to the Shelly:

V to N

G to L

M1- to 01

M1+ to 02

It does get power, I can connect with the app, but nothing happens with the TV lift when I press up or down in shutter mode.

Your advice is greatly appreciated.

With kind regard,

Arthur