This is what I have found after a week of testing.
When using the app on my phone if I am outside of my house so using 4G mobile data I get the profiles displayed correctly, but as soon as I connect to my house WiFi and go into the app the Wall display will not display the profiles.
So don't know if its the WiFi on my router or if its a problem within the app. All other Shelly modules are fine its only the Wall display.
Well after a couple of days of it not working, it now works. I did send in a ticket to Shelly and their response was, it takes time for the app to update. But a couple of days really!!
There is also a few other issues with the wall display, as some things are displayed using a browser and the control.shelly.cloud address and they are not displayed in the App on my phone.
The firmware for the Wall display I am using is upto date and is 20231213-155002/1.2.5-4336d946-hotfix3
I have created a different post to high light these differences.
Also logging into the wall display directly using its IP address also yields different results
Over the last few days I have been experimenting with my Shelly wall display.
It wasn't until I started using the https://control.shelly.cloud in my web browser on a windows PC that I noticed a few differences.
In the App on my phone I see no schedules but do see the schedules in the web browser.
Does anyone else have this issue.
I have also submitted a ticket with Shelly
First images is the one from my phone and the second image is from my PC
I deleted the thermostat I had set up.
Ok not too sure what was going on but I then set up the thermostat again, this time I could see the heating schedules so added them. Last time I just added schedules via the schedule section in the menu, not via the thermostat section.
I also noticed a new firmware update so updated. I am now on 20231213-155002/1.2.5-4336d946-hotfix3
So in theory the wall display is now controlling a Shelly Plug V2 which it seems to be doing during the specified times.
So hopefully it should now work.
I was just wondering if Shelly will be releasing a Version 2 TRV module, as the originals have been out of stock or unavailable for quite sometime now.
Can I ask why you use a web hook.
As you can do this with out using a web hook. The way I did it with my Wall Display was to set it up as a thermostat, select the temp sensor to use, then select the actuator. No need to send web commands.
If you have already set up a thermostat in the Wall Display then just edit it and go through the options Main, Sensor and Actuator, select the required actuator. I then set up 4 schedules On at 07:00 and Off at 09:00 then on at 18:00 and off at 23:00. Seems to work, I only set this up about three hours ago (time now 22:47), but so far so good.
After a day of testing
Schedules are not working. Other than that I can get the wall display to control a plugin module that os attached to my electric radiator. But as it says its in Beta so hopefully a new firmware update will solve the many issues.
