Beiträge von kal800

Hello again,

I've got an issue, not necessary related to shelly device directly. The whole installation has worked perfectly till temperature dropped. We've got now less than -5C and the fence opener stopped to work - I can hear the click of the shelly's relay and tiny click at the opener itself, but it does not release the fence. I checked the voltage on the shelly's terminals showing 12V but only 8V on the locker's terminals. I believe it is the reason. How can I overcome it? The most obvious solution would be to install DC adaptor with higher voltage, say 15V, but wouldn't I burn Shelly device when I connect it such way?

Thanks

Krzysztof

Well it works!!! Thanks. One question - on the specification data it is written, that the device is HomeKit compliant, however I cannot see it in my Home app. Any actions to add it?

Well, it works... almost. The device is discoverable and I was able to add it to the network. The optional switch works (I can hear the click when I push the button, and another when I release it), turning it on works too (the relay clicks too), but there is no voltage on output terminals... Any ideas?

I do not have jumper. Got 0 1 SW 12V+ L N connectors

Hello,

I've got a fence lock which is powered by 12V DC adaptor. Currently it is being activated by push button switch that closes the circuit. I would like to retain push button to unlock that fence having ability to be operated by Shelly relay as well. How should I wire it?

thanks

Kal800