Beiträge von Nechoj

You can get access to previous firmware versions here: http://archive.shelly-tools.de/. This is a link generator page. You type in your local IP address, select the device type (SHMOS-02 in our case here) and then you get a drop-down menu to select an old version of the firmware.

Finally fixed the problem by downgrading to v2.1.8. This is the procedure:

1. Find out the IP address of the device in the local network (example: 192.168.178.55)

2. Press reset button briefly once

3. Try to access the device web page in a browser: http://192.168.178.55

4. If the web page does not load, repeat steps 2 & 3

5. If the web page loads properly, the device is online. Within 1 minute, access this url with your browser

http://192.168.178.55/ota?url=http:/…OS-02_build.gbl

(adapt to your local device IP address accordingly)

6. After some minutes, you should be able to access the device using the local url: http://192.168.178.55

7. The firmware section should show the old version v2.1.8

Hi, same here. After the latest firmware update to 20230929-074305/v2.2.0@3699b77a, the devices seem to be in a permanent power save mode. Motion detection does not wake them up.

Try to wake it up manually: Press the reset button once, then it should be up and running for 3 minutes. After that, it falls asleep again.

I have no idea how to solve this problem - maybe we need a new software for this.