2 Button Control with Shelly I3 possible?

I use 2 momentary buttons to control Shelly dimmers, and I wish to add remote 2 momentary button control of one of the dimmers using a Shelly I3 and have them operating exactly the same as if they were physically connected.

The Shelly dimmer exposes all the commands required to do this via the API (toggle power, begin dim up/down, stop dim) - however, according to the documentation, the I3 seems to be missing one action needed to implement standard 2 button operation of a dimmer:

short press = toggle power

long press = begin dim up/down (depending on whether it is the up or down button)

but the Shelly I3 appears to have no 'stop long press' event required to cancel dimming in the same way as physically attached 2 button operation.

Was full compatibility between an I3 and Dimmer not considered? Using different button presses from one switch to another controlling the same light isn't acceptable for me - or am I missing something?

Zitat

HTTP-Request ShellyDimmer

you can use:

• increase Dimming begin*¹ ShellyDimmer: http://192.168.xxx.xxx/light/0?dim=up
• decrease Dimming begin*¹ ShellyDimmer: http://192.168.xxx.xxx/light/0?dim=down
• ShellyDimmer dimming stop: http://192.168.xxx.xxx/light/0?dim=stop
• ShellyDimmer dimming cycle *²: http://192.168.xxx.xxx/light/0?dim=cycle

*¹ until receive another command

*² cycle: Up/Stop/Down/Stop/...

...for HTTP-URL in i3

Alles anzeigen

Sorry Olsche, I acknowledge that the dimmer supports the commands to do this, but simply repeating this fact in no way answers my question. which is:

I wish to replicate the behavior of 2 momentary buttons directly wired to a Shelly dimmer by using 2 momentary buttons connected to a Shelly I3 - in particular: HOW DO I SEND A DIM STOP COMMAND after a LONG PRESS ends ON A SHELLY I3