1.10 Final

Erster

Firmware 1.10 Final ist raus:

Viel Spaß beim Updaten.

Hier noch das Changelog:

* [All devices] Add new property fanSpeed to CoIoT

* [All devices] Add new unit pct to CoIoT

* [All devices] Add new endpoint /cit/d to retrieve CoIoT description package over HTTP

* [All devices] Add attributes ap_roaming.enabled, ap_roaming.threshold and parameters ap_roaming_enabled, ap_roaming_threshold to /settings endpoint

* [All devices] Add attributes coiot.enabled, coiot.peer and parameters coiot_enable, coiot_peer to /settings endpoint

* [All devices] Add attribute/parameter debug_enable to /settings endpoint

* [All devices] Add attribute/parameter allow_cross_origin to /settings endpoint

* [All devices] Fix unixtime to be UTC

* [All devices] Add new endpoint /ota/check

* [All devices] Add new endpoints /debug/log and /debug/log1

* [All devices] Add mode to MQTT shellies/<shellymodel>-<deviceid>/announce response (when applicable)

* [All devices] Update description of /settings/actions endpoint

* [All devices] Make it possible to retain MQTT LWT topic (add attribute mqtt.retain and parameter mqtt_retain to /settings endpoint)

* [All devices] Add info on max supported schedule rules

* [Shelly Door/Window 1/2, Shelly H&T, Shelly Smoke, Shelly Flood, Shelly Button1] Add new endpoint /sta_cache_reset

* [Shelly 1/1PM, Shelly 2, Shelly 2.5, Shelly Plug/PlugS, Shelly EM, Shelly 3EM] Add attribute/parameter wifirecovery_reboot_enabled to /settings endpoint

* [Shelly 1/1PM/1L, Shelly 2, Shelly 2.5, Shelly I3, Shelly Uni, Shelly Dimmer 1/2, Shelly RGBW2] Clear input events after a pre-defined lifetime; don't publish input events on periodic MQTT updates

* [Shelly 1PM, Shelly 2.5, Shelly I3] Add MQTT topic shellies/<model>-<deviceid>/temperature_status

* [Shelly 1L] Update possible values of attribute/parameter default_state in /settings endpoint

* [Shelly 2.5] Drop meters array from /settings endpoint

* [Shelly Dimmer 2] Add attributes/parameters pulse_mode_detected, pulse_mode_rebooted, load_autodetect to /settings endpoint

* [Shelly Dimmer 2] Add attributes calibrated, calib_status, calib_running, wire_mode and forced_neutral to /status endpoint

* [Shelly Dimmer 1/2] Add attribute/parameter zcross_debounce to /settings endpoint

* [Shelly Dimmer 1/2] Change type of attribute loaderror (from bool to number) in /status endpoint

* [Shelly Door/Window 1/2] Add report_url (URL to report sensor events on) to /settings/actions endpoint

* [Shelly Door/Window 1/2] Add attributes/parameters vibration_sensitivity and lux_wakeup_enable to /settings endpoint

* [Shelly Door/Window 1/2] Update possible values of attribute act_reasons in /status endpoint

* [Shelly Door/Window 2] Add tmp object (temperature sensor reading) to /status endpoint

* [Shelly Door/Window 2] Add temperature_threshold, temperature_units and temperature_offset parameters to /settings endpoint

* [Shelly Door/Window 2] Add MQTT topic shellies/shellydw2-<deviceid>/sensor/temperature

* [Shelly Flood, Shelly H&T] Add id to report_url

* [Shelly Flood] Fix sleep_mode.period description (it's not a configurable parameter)

* [Shelly Gas] Add valves array to /status endpoint; add new endpoint /settings/valve/0

* [Shelly Gas] Add MQTT topics shellies/shellygas-<deviceid>/valve/0/state and shellies/shellygas-<deviceid>/valve/0/command

* [Shelly Bulb] Fix description of effects

* [Shelly Uni] Add missing input events to /status endpoint

* [Shelly Button1] Store input attribute event_cnt to RTC memory when device goes to sleep