Actron Air On/Off

    Hi There

    First post hope someone can help

    I am trying to switch on and off an Air conditioner via the Air cons control panel.

    The Data Line incoming only had 5v so i wired an adapter in and have the Shelly Powered

    There are separate buttons for on and off so im looking at putting 2 Shelly 1 units in for this to control on/off i have 2 wires on the switch that is pressed to turn on. However the switch is not acting as pushed (Once i have this i can repeat for off control).

    Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.


    This is the Shelly 1

    Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.

    I have it set up as a push button switch turn off after 1 second. I think im close but driving me crazy!

    Thanks

    Steve