Button1 as togle button

Emanuel

Hello,

i have received today the new Button1 shelly button. I have try to configure it using the scenes settings simulating a toggle switch but i did not succeed.

What i would is to short press the button for turn on the light and short press another time for turn off the same light. Is it possible obtain this behaviour through the mobile app settings?

Thanks for the reply.

SebMai

I haven't one so I don't know the right url action names but

The url witch you have to set is

Code

http://ip/relay/0?turn=toggle

or instead of relay , light

Depends on the other device

Emanuel

Thanks for the reply,

therefore is not possible perform this action with the "scenes" settings ?

I ask for this because i'm not sure that the IP will be the same along the time, and my network is not configured for static IP.

SebMai

Sorry I can't say it, can't look what possible is with Button Scenes.

Eventually someone other will answere

Emanuel

Thank you for the help, i will wait a person that have the button1.

I have try configuring two scenes:

1. When there is a short press on button1 "and" the status of relay is off -> turn on the relay

and another scene

2. When there is a short press on button1 "and" the status of relay is on -> turn off the relay

the relay is a shelly 1PM

but after saved, when i press button1, the scenes go in infinite loop, i have try both settings of realy that are the "status" or the "input", but without lucky.

In any case, thanks again for the help.