Physical Buttons

Hi

I have that buttons on my roller shutters. There's a button to down and another to up. The two buttons have a Stop position so if i press the down button the up button goes mechanical (not a press button) to the stop position and the shutter goes all down or stops if i press the stop button pn the down button. On the Shelly 2.5 if i press the down button the shutter goes down but if i press the stop or the up button the shutter goes down again. It's possible to mantain the original effect?

Zitat

Please upload the picture here in the forum.

Thanks.

Sorry.

I'm learning too! Here's the image:

Zitat

You're welcome.

What is your setup for INPUT-BUTTON-MODE and BUTTON-TYPE?

INPUT-BUTTON-MODE: Open & Close Buttons - Use separate buttons for OPEN & CLOSE.

BUTTON-TYPE: Momentary - Press Button 1 for OPEN and Button 2 for CLOSE.