How to leave from Factory test mode

SparkyMaster

Shelly device: How to leave from Factory test mode

Some of devices could be not reset properly after testing and stay at Factory test mode.

Symptoms:

1. Device can be added to the app, but you can’t open device interface by IP.

2. When you try to open device by IP the response is: {"rssi": 0, "power": 0.00}

How to proceed with FW version before 20190520 or 1.5.0

1. Power on device

2. Press reset button on the back shortly

3. Device will boot and will leave from this mode temporary.

4. Enable Wi-Fi (if not) and connect device to your home network using the app.

5. Find what is the device IP, you can find it in Settings - > Device info. Or you can use Shelly Device finder from here:

6. Update device to latest version, press Update button.

7. Wait 3 min.

8. Press reset button shortly

9. Execute from PC or phone browser:

if the device is in your wi-fi network

How to proceed with FW version after 20190520 or 1.5.0

1. Power on device

2. Check the LED – should flash fast

3. Press reset button on the back shortly

4. Device will boot and will leave from this mode temporary.

5. Execute from PC or phone browser

if the device is in your wi-fi network

6. Reboot the device

Done!