Shelly Delay for HTTP

Diniska

I have a question?

I don't want to use the cloud.

"Toggle Switch" Shelly 2.5 is OFF

Shelly I3 giving order to a Shelly 2.5

In the "BUTTON SWITCHED ON URL" of Shelly I3's "Input 1"

-http://(shellyIP) or (localhost)/relay/1?turn=off&timer=10

=Put ON

I need a delay to execute this order:

-http://(shellyIP) or (localhost)/relay/1?turn=on&timer=60

=Put it to OFF

Something similar to this:

-http://(shellyIP) or (localhost)/relay/1?turn=off&timer=10&[DELAY]turn=off

The intention is that the "Inibir Porta" is turned off again.

I've been banging my head against the walls for almost two weeks with this problem and I can't find a solution.

Does anyone have a solution?

I thank.

Der Inhalt kann nicht angezeigt werden, da Sie keine Berechtigung haben, diesen Inhalt zu sehen.

66er

If you use the same ip-adress in both actions, this can't work.

This Shelly only do AUTO-OFF or AUTO-ON on same time.

SparkyMaster

This configuration is not possible, two opposing commands in one Action!

When i3 is ON: URL in „Button is ON…“ -> Shelly 2.5 ON with timer

When i3 is OFF: URL in „Button is OFF…“ -> Shelly 2.5 OFF with timer

or

Auto OFF in both Shellys

Efi Herman

I have an unconventional suggestion, use an additional SHELLY device (like SHELLY1) as a timing relay.

In the "BUTTON SWITCHED ON URL" of Shelly I3's "Input 1"

In the "OUTPUT SWITCHED ON URL" of Shelly 2.5's "chanel 1"

In the "OUTPUT SWITCHED OFF URL" of Shelly "Timing Relay" "chanel 0"

This will do the trick.

Eulhofer

Oh... I am to later....

O

Ähnliche Themen