Cant disconnect Automation from Shelly Motion to Shelly 1

    • Autor

    Hi

    I have a Shelly Motion set up in my Hallway as well as 2 Shelly 1's. I used to have an automation in the Alexa app that would trigger both Shelly 1's to turn on my lights when motion was detected. I then improved that my asking for the lights to only turn on after 6pm until 8.30am. This worked fine for when I wanted the lights on but when I didn't what the motion to activate the lights, one of the Shelly 1's still triggered, turning one of my lights on.

    I decided to remove the automation from Alexa and add this in the Shelly app instead. Same situation happened. So I removed that automation too.

    Now I have no automations running for this at all, however, one of my Shelly 1's still triggers when motion is detected. I cant seem to kill the link between them. I have rebooted both devices and done a factory reset of both, but the motion still sets 1 of the Shelly 1's to turn on a light.

    Any ideas of how to stop this?

    Thanks